Hyundai And Shell Base Oil Company Ltd Begins Production At Base Oil Manufacturing Plant In South Korea
Sep 25, 2014
HYUNDAI and SHELL Base Oil Co., Ltd. a joint venture company formed by Shell and Hyundai Oilbank, today inaugurated a new base oil manufacturing plant in Daesan, South Korea. The plant has the capacity to produce approximately 13,000 barrels per day or 650 kilotonnes of API Group II base oils per year.
Mark Gainsborough, Executive Vice President for Shell Lubricants, said: “As the demand for higher quality lubricants is on the rise in Asia, the region is shifting away from Group I base oils towards increased use of Group II and Group III base oils. This plant contributes significant Group II base oil supply to Shell’s supply chain in the region, helping us grow our premium lubricants business in Asia, especially in China and Northeast Asia.”
The plant was built to capture the growing demand for Group II base oils in Asia. Construction was completed in a record 20 months, close to 2 months ahead of schedule and successful commercial production of base oils began in July 2014.
This is the fourth base oil production plant for Shell in the region, after Pulau Bukom in Singapore, Kaosiung in Taiwan and Yokkaichi in Japan (a joint venture). Shell base oil production plants in Asia work alongside Shell’s network of 19 blending plants in the region, to deliver high quality Shell finished lubricants. Shell has blending plants in China, Singapore, Thailand, Malaysia, the Philippines, Vietnam, South Korea, Pakistan and India. Shell is also currently building two new blending plants in Asia, one in China and one in Indonesia.
Mallika Desai, +6597292377, email@example.com
Photos of the plant and the opening ceremony are available on request.
NOTES TO EDITOR
- Base oils are the key component of finished lubricants, making up on average of 60-80% of the end product. There are five technical grades of base oil based on the composition of saturates, sulphur and viscosity group I, II, III, IV and V.
- The joint venture (60% Hyundai Oil bank, 40% Shell) currently only manufactures base oils. It is located at the existing HDO refinery in Daesan, South Korea. Like crude oil, base-oils are also traded on the open market. Commercial agreements are in place, with Shell taking some of the base oil and using it to create high quality finished lubricants at its blending plants around the region.
- Demand for base oil is projected to grow significantly in the world over the next decades and especially in the Asia Pacific region. The Asia Pacific region is driving global growth in lubricants demand. By 2020 it is estimated the region will represent more than 50% of all demand.
- Overall finished lubricants demand is also projected to grow by 10% per annum in China and other Asian countries. The growth is predominantly in higher quality lubricants requiring Group II and Group III base oils for blending.
- When completed this will be the ninth base oil manufacturing plant for Shell globally. Three of Shell’s current base oil manufacturing plants are in Asia: Pulau Bukom in Singapore; Kaosiung in Taiwan and Yokkaichi in Japan (a joint venture).
Shell has a global network of 50 lubricant blending plants, where base oils are blended with additives to make finished lubricants.
- Shell produces finished lubricants for transport (passenger cars, heavy duty vehicles, ships and planes) as well as industry (including power, mining and manufacturing).
About Shell Lubricants
The term “Shell Lubricants” collectively refers to Shell Group companies engaged in the lubricants business. Shell sells a wide variety of lubricants to meet customer needs across a range of applications. These include consumer motoring, heavy-duty transport, mining, power generation and general engineering. Shell’s portfolio of lubricant brands includes Pennzoil, Quaker State, Shell Helix, Shell Rotella, Shell Tellus and Shell Rimula. We are active across the full lubricant supply chain. We manufacture base oils in eight plants, blend base oils with additives to make lubricants in over 50 plants, distribute, market and sell lubricants in over 100 countries.
We also provide technical and business support to customers. We offer lubricant-related services in addition to our product range. These include: Shell LubeMatch –the market leading product on-line recommendation tool, Shell LubeAdvisor - helps customers to select the right lubricant through highly trained Shell technical staff as well as online tools, and Shell LubeAnalyst - an early warning system that enables customers to monitor the condition of their equipment and lubricant, helping to save money on maintenance and avoid potential lost business through equipment failure.
Shell’s world-class technology works to deliver value to our customers. Innovation, product application and technical collaboration are at the heart of Shell lubricants. We have lubricants research centres in China, Germany, Japan (in a joint venture with Showa Shell), and the USA. We invest significantly in technology and work closely with our customers to develop innovative lubricants. We have a patent portfolio with 150 + patent series for lubricants, base oils and greases; more than 200 scientists and lubricants engineers dedicated to lubricants research and development.
Customer benefits include lower maintenance costs, longer equipment life and reduced energy consumption. One of the ways we push the boundaries of lubricant technology is by working closely with top motor racing teams such as Scuderia Ferrari. These technical partnerships enable us to expand our knowledge of lubrication science and transfer cutting-edge technology from the racetrack to our commercial products
The companies in which Royal Dutch Shell plc directly and indirectly owns investments are separate entities. In this presentation “Shell”, “Shell group” and “Royal Dutch Shell” are sometimes used for convenience where references are made to Royal Dutch Shell plc and its subsidiaries in general. Likewise, the words “we”, “us” and “our” are also used to refer to subsidiaries in general or to those who work for them.
These expressions are also used where no useful purpose is served by identifying the particular company or companies. ‘‘Subsidiaries’’, “Shell subsidiaries” and “Shell companies” as used in this presentation refer to companies in which Royal Dutch Shell either directly or indirectly has control, by having either a majority of the voting rights or the right to exercise a controlling influence.
The companies in which Shell has significant influence but not control are referred to as “associated companies” or “associates” and companies in which Shell has joint control are referred to as “jointly controlled entities”. In this presentation, associates and jointly controlled entities are also referred to as “equity-accounted investments”.
The term “Shell interest” is used for convenience to indicate the direct and/or indirect (for example, through our 23% shareholding in Woodside Petroleum Ltd.) ownership interest held by Shell in a venture, partnership or company, after exclusion of all third-party interest.
This presentation contains forward-looking statements concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements.
Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements.
Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions.
These forward-looking statements are identified by their use of terms and phrases such as ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘intend’’, ‘‘may’’, ‘‘plan’’, ‘‘objectives’’, ‘‘outlook’’, ‘‘probably’’, ‘‘project’’, ‘‘will’’, ‘‘seek’’, ‘‘target’’, ‘‘risks’’, ‘‘goals’’, ‘‘should’’ and similar terms and phrases.
There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this presentation, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell’s products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition;
(g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, fiscal and regulatory developments including potential litigation and regulatory measures as a result of climate changes; (k) economic and financial market conditions in various countries and regions;
(l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; and (m) changes in trading conditions. All forward-looking statements contained in this presentation are expressly qualified in their entirety by the cautionary statements contained or referred to in this section.
Readers should not place undue reliance on forward-looking statements. Additional factors that may affect future results are contained in Royal Dutch Shell’s 20-F for the year ended 31 December, 2013 (available at www.shell.com/investor and www.sec.gov ). These factors also should be considered by the reader. Each forward-looking statement speaks only as of the date of this press release, 25 September, 2014.
Neither Royal Dutch Shell nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this presentation. There can be no assurance that dividend payments will match or exceed those set out in this presentation in the future, or that they will be made at all.
We use certain terms in this presentation, such as discovery potential, that the United States Securities and Exchange Commission (SEC) guidelines strictly prohibit us from including in filings with the SEC. U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website www.sec.gov. You can also obtain this form from the SEC by calling 1-800-SEC-0330.