Skip to main content
Petrochemical facility

Trade release: Exceptional catalyst selectivity prompts cycle length extension at the Petro Rabigh monoethylene glycol plant, Saudi Arabia

Increased catalyst selectivity and efficiency could translate into multi-million dollar savings.

By Shell Catalysts & Technologies on Feb 14, 2021

Rabigh Refining & Petrochemical Company (Petro Rabigh) has achieved an impressive 92% catalyst selectivity at the start of the most recent cycle at its 600,000-t/y monoethylene glycol (MEG) production facility in Saudi Arabia. The plant uses the advanced Shell OMEGA process, which is based on the catalytic conversion of both ethylene to ethylene oxide and ethylene oxide to ethylene glycol.

Ethylene oxide catalyst selectivity is a key factor in the efficiency of MEG production: a higher selectivity means that smaller volumes of raw material are required to manufacture the product. The cycle that started in May 2020 marked a change in catalyst from Shell Catalysts & Technologies’ S-888 (which had achieved an initial selectivity of 90.9%) to S-889 catalyst.

The resulting improvement of just over 1% will deliver significant savings and lead to higher profitability or enhanced competitiveness in what is, at present, a very challenging market. This catalyst upgrade is expected to reduce raw materials requirements by 4,000 t/y for ethylene and 14,000 t/y for oxygen. Over a full cycle, these reductions could translate into a multimillion-dollar saving.

This outstanding performance is the result of both the improved catalyst and the way the unit is operated. The Petro Rabigh plant carried out a well-structured catalyst selection process with an emphasis on maximising performance and extending the run length. In addition, the plant has been able to sustain very stable operations thanks to the tireless efforts of the highly skilled engineers and the relentless focus on keeping the catalyst fully optimised by careful chloride level adjustments.

The plant has been using Shell Catalysts & Technologies catalysts since 2009. “We have achieved strong results across three- and four-year cycles with earlier-generation catalysts,” explains Saeed Al Ghamdi, Head of Process Engineering at Petro Rabigh. “The stability of the new catalyst, coupled with its increased selectivity, has encouraged us to look at pushing the cycle length to five years.”

Learn more about optimising refinery operations with collaboration and digitisation

Ammar Bakheet, Process Engineer, Petro Rabigh, said, “The results show that, with careful planning and well-managed start-ups and processes, engineers can achieve substantial improvements in performance by moving to the latest generation of catalyst products.”

“The continuous engagement and collaboration with Petro Rabigh were key enablers for selecting the optimum catalyst for Petro Rabigh,” observed Jaafar El-Masri, Technical Service Manager, Shell Catalysts & Technologies. “This will add substantial value in the form of raw materials savings, and I am excited at the prospect of seeing the current catalyst batch run for the full five years.”

Learn what improvements in catalyst technologies can mean for EO producers

Notes to editors

About Rabigh Refining & Petrochemical Company (Petro Rabigh)

Petro Rabigh was founded in 2005 as a joint venture between Saudi Aramco and Sumitomo Chemical. The plant produces petroleum-based products and ethylene- and propylene-based derivatives.

Petro Rabigh products have a vast range of applications that offer innovative downstream investors the chance to establish new industries in the region, thereby bringing with them new skills and job opportunities. Petro Rabigh also offers many exciting investment opportunities through the Petro Rabigh industrial complex, Rabigh PlusTech Park, which is the first private industrial park for conversion industries in Saudi Arabia and is designed to accommodate third-party polymer compounding projects.

Consequently, Petro Rabigh is at the hub of an upsurge in economic and technological development in line with Saudi Arabia’s Vision 2030 to create a vibrant society, a thriving economy and an ambitious nation.

About Shell Catalysts & Technologies

Shell Catalysts & Technologies, part of Shell, is a leading technology licensor and brings owner–operator–innovator–licensor capabilities to the market. It has more than 1,200 references for gas processing technologies at gas plants and refineries worldwide.

It supports Shell and non-Shell businesses by working with them to co-create integrated, customised solutions comprising licensed technologies, refining and petrochemical catalysts and technical services.

It was formed by combining Shell Global Solutions, a technology licensor with a track record of delivering pioneering process schemes and innovative configurations; Criterion Catalysts & Technologies, the world’s largest hydroprocessing catalyst supplier and CRI Catalyst Company, a pioneer in the petrochemical catalyst sector.

It operates across the energy value chain: from upstream, gas processing and liquefied natural gas through to downstream refining and petrochemicals.

The companies in which Shell plc directly and indirectly owns investments are separate legal entities. In this content “Shell”, “Shell Group” and “Group” are sometimes used for convenience where references are made to Shell plc and its subsidiaries in general. Likewise, the words “we”, “us” and “our” are also used to refer to Shell plc and its subsidiaries in general or to those who work for them. These terms are also used where no useful purpose is served by identifying the particular entity or entities. ‘‘Subsidiaries’’, “Shell subsidiaries” and “Shell companies” as used in this content refer to entities over which Shell plc either directly or indirectly has control. Entities and unincorporated arrangements over which Shell has joint control are generally referred to as “joint ventures” and “joint operations”, respectively. “Joint ventures” and “joint operations” are collectively referred to as “joint arrangements”. Entities over which Shell has significant influence but neither control nor joint control are referred to as “associates”. The term “Shell interest” is used for convenience to indicate the direct and/or indirect ownership interest held by Shell in an entity or unincorporated joint arrangement, after exclusion of all third-party interest.

This content contains forward-looking statements (within the meaning of the U.S. Private Securities Litigation Reform Act of 1995) concerning the financial condition, results of operations and businesses of Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions. These forward-looking statements are identified by their use of terms and phrases such as “aim”, “ambition”, ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘goals’’, ‘‘intend’’, ‘‘may’’, “milestones”, ‘‘objectives’’, ‘‘outlook’’, ‘‘plan’’, ‘‘probably’’, ‘‘project’’, ‘‘risks’’, “schedule”, ‘‘seek’’, ‘‘should’’, ‘‘target’’, ‘‘will’’ and similar terms and phrases. There are a number of factors that could affect the future operations of Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this content, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell’s products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition; (g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, judicial, fiscal and regulatory developments including regulatory measures addressing climate change; (k) economic and financial market conditions in various countries and regions; (l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; (m) risks associated with the impact of pandemics, such as the COVID-19 (coronavirus) outbreak; and (n) changes in trading conditions. No assurance is provided that future dividend payments will match or exceed previous dividend payments. All forward-looking statements contained in this content are expressly qualified in their entirety by the cautionary statements contained or referred to in this section. Readers should not place undue reliance on forward-looking statements. Additional risk factors that may affect future results are contained in Shell plc’s Form 20-F for the year ended December 31, 2021 (available at

www.shell.com/investor and www.sec.gov

). These risk factors also expressly qualify all forward-looking statements contained in this content and should be considered by the reader. Each forward-looking statement speaks only as of the date of this content, 20 May 2022. Neither Shell plc nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this content.

Also, in this content we may refer to Shell’s “Net Carbon Footprint” or “Net Carbon Intensity”, which include Shell’s carbon emissions from the production of our energy products, our suppliers’ carbon emissions in supplying energy for that production and our customers’ carbon emissions associated with their use of the energy products we sell. Shell only controls its own emissions. The use of the term Shell’s “Net Carbon Footprint” or “Net Carbon Intensity” are for convenience only and not intended to suggest these emissions are those of Shell plc or its subsidiaries.

Shell’s operating plan, outlook and budgets are forecasted for a ten-year period and are updated every year. They reflect the current economic environment and what we can reasonably expect to see over the next ten years. Accordingly, they reflect our Scope 1, Scope 2 and Net Carbon Footprint (NCF) targets over the next ten years. However, Shell’s operating plans cannot reflect our 2050 net-zero emissions target and 2035 NCF target, as these targets are currently outside our planning period. In the future, as society moves towards net-zero emissions, we expect Shell’s operating plans to reflect this movement. However, if society is not net zero in 2050, as of today, there would be significant risk that Shell may not meet this target.

This content may contain certain forward-looking non-GAAP measures such as cash capital expenditure and divestments. We are unable to provide a reconciliation of these forward-looking Non-GAAP measures to the most comparable GAAP financial measures because certain information needed to reconcile those Non-GAAP measures to the most comparable GAAP financial measures is dependent on future events some of which are outside the control of Shell, such as oil and gas prices, interest rates and exchange rates. Moreover, estimating such GAAP measures with the required precision necessary to provide a meaningful reconciliation is extremely difficult and could not be accomplished without unreasonable effort. Non-GAAP measures in respect of future periods which cannot be reconciled to the most comparable GAAP financial measure are calculated in a manner which is consistent with the accounting policies applied in Shell plc’s consolidated financial statements.

The contents of websites referred to in this content do not form part of this content.

We may have used certain terms, such as resources, in this content that the United States Securities and Exchange Commission (SEC) strictly prohibits us from including in our filings with the SEC. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website

www.sec.gov

Cautionary note