|Physical characteristics||Key technical properties||Value/unit||Main applications|
|Evaporation rate: Medium||Boiling range||106-136°C||Adhesives|
|Solvency Power: Medium||Flash point||1°C||Coatings & Inks|
|Odour: Low||Aromatics content||<5 mg/kg||Polymers & resins|
|Impurities: Very Low||Benzene content||<1 mg/kg||Rubbers|
|-||-||-||Metal, paper and leather|
SBPs consist of paraffins and cycloparaffins in the C6-C10 range. Thanks to their simple composition, narrow boiling point solvents provide predictable and consistent evaporation behaviour that is important in many applications. Our SBPs also have very low total aromatics and benzene content, with virtually undetectable levels of polycyclic aromatics.
SBP 100/140 is a colourless fluid with a low odour. In the range of SBPs, it has a medium boiling range and a slower evaporation rate. Its ability to dissolve many organic compounds and evaporate easily means it is used as a solvent or diluent in a wide range of industrial and professional applications.
Key application areas include adhesives, industrial cleaning, aerosol carriers, paints and coatings, inks, rubber manufacturing, catalyst preparation and the metal, paper and leather processing industries.
Shell Chemicals SBP 100/140 is manufactured to high standards required to produce a hydrocarbon fluid that offers consistent quality and performance, including feed selection and a deep hydrogenation process that minimises impurities.
The n-Hexane content of our SBP 100/140 is also very low and consistent, reducing occupational exposure and simplifying control measures.
How to buy from us
Shell Chemicals can supply a broad range of bulk hydrocarbon and chemical solvents to industrial customers. To make an initial enquiry, please complete this contact us to buy form.
Before you do, please read the following essential information on doing business with us:
Safety is our number one priority. As well as providing customers with information on the safe and environmentally responsible use of our products, we are committed to ensuring that risks to the safety of our staff and our contractors are reduced to the lowest reasonably practicable level. We therefore require assurance from customers that appropriate safety standards for unloading and storage are met before we make deliveries (see the HSSE addenda in our general Terms & Conditions of Sale below). Our HSSE specialists can provide guidance on these standards.
Customers can order and have the product delivered by Shell or collect the product themselves from one of our manufacturing facilities. Available modes of delivery include truck, rail, or inter-modal (separate conditions apply).
In case of customer collections, the Shell site minimum requirements apply. For collection by barge or tanker special safety/vetting standards and requirements apply.
Minimum order size
Deliveries by road should involve fully loaded trucks of minimum 22 tonnes made up of one product. If you collect the product from our site the minimum order size is 18 tonnes.
Shell’s standard payment method is Direct Debit 30 days from invoice.
The following documents are provided with each delivery:
- Bill of Lading, CMR Waybill or other relevant transport document
- Certificate of Analysis or Conformity (if required)
- HSSE-related documentation in line with regulations
- Customs documentation in line with regulations (if required)
Please also see: