AeroShell Turbine Oil 2
AeroShell Turbine Oil 2 is a 2 mm²/s mineral turbine engine oil, blended from mineral base stocks, enhanced with a pour-point depressant and an anti-oxidant.
Specifications & approvals
| Country / OEM | Specification |
|---|---|
| United States | MIL-PRF-6081E Grade 1010 & 1010N |
| French | AIR 3516/A |
| Russian | MK-8 analogue |
| NATO Code | O-133 |
| Joint Service Designation | OM-10 (Obsolete) |
| Rolls-Royce | OMat 1024A |
The TDS and MSDS are in English, but you can find these documents for other countries in the Shell EPC area.
Applications
AeroShell Turbine Oil 2 is widely used for inhibiting fuel systems and fuel system components during storage.
AeroShell Turbine Oil 2 is an analogue to the Russian Grade MK-8 and can therefore be used in engines which require the use of MK-8.
Health, Safety and Environment
Health and Safety
- This product is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.
- Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
- Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from https://www.epc.shell.com/
Protect the Environment
- Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional information
Advice
- Advice on applications not covered here may be obtained from your Shell representative.
Typical Physical Characteristics
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.
