Shell Marine has unveiled next generation Shell Argina and Shell Gadinia trunk piston oils for the medium-speed engine market, confirming the success of a two-year quest to meet simultaneous market challenges posed to ship owners by technology advances and squeezed costs.
With shipping investment opportunities scarce and competition intense, owners face pressures to shift towards cleaner fuels that address emissions regulations. Shell thinks that demand for distillates and low-sulphur heavy fuel oil will only increase as shipping approaches a global fuel sulphur content cap of 0.5%, imposed by IMO from 2020. Already, dual-fuel engines are taking an increasing share of the medium speed market.
Newer generation engines are designed for better fuel economy and lower operating costs, achieved by higher brake mean effective pressure and higher operating temperatures.
“These characteristics pose a challenge for trunk piston engine oils, increasing the risk of rapid BN depletion and increased viscosity,” explains Marcus Schaerer, Shell Marine Global Marketing Manager. “The new Shell Argina and Shell Gadinia oils feature excellent BN retention and viscosity control to address the faster oxidation that leads to deposit formation or lubricant contamination, without resorting to unnecessary oil sweetening.”
The Shell Argina range includes four grades: the BN20 Shell Argina S2 for residual, blended and distillate fuels; the ‘mainstream’ Shell Argina S3 (BN30) and Shell Argina S4 (BN40); and Shell Argina S5 (BN55) – offering extra protection from deposits and extended oil life.
Meanwhile, Shell Gadinia S3 is a new addition to the existing standard and anti-lacquer Gadinia variants, and has been developed to control oil consumption in modern engines burning distillate fuels. “New and modern engines are designed to achieve higher efficiencies, lower emissions and lower operating costs,” says Schaerer. Shell Gadinia S3 has a comprehensive set of non-engine approvals for a wide range of non-engine shipboard applications, to provide a single long-term lubricant solution for smaller vessels working in the most severe operating conditions.
Exhaustive in-engine trials at Shell’s Marine and Power Innovation Centre in Hamburg confirm Shell Argina and Shell Gadinia as oils that avoid sludge formation, improve piston and crankcase cleanliness, and thus block deposit formation. Both oil types offer improved detergency over previous Shell Marine products and those from competitors.
“Compared with a high-performing industry reference oil, the new Shell Argina S5 shows a 12.6% improvement in BN retention and a 15-20% improvement in piston undercrown deposit thickness, for example,” says Schaerer. “For operators, this can translate into lower operating costs via longer oil life, less sweetening and reduced maintenance.”
Shell Marine Global: Oliver Lim +65 6477 7499 email@example.com
About Shell Marine
Shell provides lubricants for the marine industry through its Shell Marine business. It serves over 10,000 vessels, ranging from large ocean-going tankers to small fishing boats in over 700 ports across 59 countries. The advice and technical services we provide help our customers achieve maximum value from using our lubricant products across all types of machinery and equipment on a ship.
Royal Dutch Shell plc
Royal Dutch Shell plc is incorporated in England and Wales, has its headquarters in The Hague and is listed on the London, Amsterdam, and New York stock exchanges. Shell companies have operations in more than 70 countries and territories with businesses including oil and gas exploration and production; production and marketing of liquefied natural gas and gas to liquids; manufacturing, marketing and shipping of oil products and chemicals and renewable energy projects. For further information, visit www.shell.com.
The companies in which Royal Dutch Shell plc directly and indirectly owns investments are separate legal entities. In this announcement “Shell”, “Shell group” and “Royal Dutch Shell” are sometimes used for convenience where references are made to Royal Dutch Shell plc and its subsidiaries in general. Likewise, the words “we”, “us” and “our” are also used to refer to subsidiaries in general or to those who work for them. These expressions are also used where no useful purpose is served by identifying the particular company or companies. ‘‘Subsidiaries’’, “Shell subsidiaries” and “Shell companies” as used in this announcement refer to companies over which Royal Dutch Shell plc either directly or indirectly has control. Entities and unincorporated arrangements over which Shell has joint control are generally referred to as “joint ventures” and “joint operations” respectively. Entities over which Shell has significant influence but neither control nor joint control are referred to as “associates”. The term “Shell interest” is used for convenience to indicate the direct and/or indirect ownership interest held by Shell in a venture, partnership or company, after exclusion of all third-party interest.
This announcement contains forward-looking statements concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions. These forward-looking statements are identified by their use of terms and phrases such as ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘goals’’, ‘‘intend’’, ‘‘may’’, ‘‘objectives’’, ‘‘outlook’’, ‘‘plan’’, ‘‘probably’’, ‘‘project’’, ‘‘risks’’, “schedule”, ‘‘seek’’, ‘‘should’’, ‘‘target’’, ‘‘will’’ and similar terms and phrases. There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this announcement, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell’s products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition; (g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, fiscal and regulatory developments including regulatory measures addressing climate change; (k) economic and financial market conditions in various countries and regions; (l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; and (m) changes in trading conditions. There can be no assurance that future dividend payments will match or exceed previous dividend payments. All forward-looking statements contained in this announcement are expressly qualified in their entirety by the cautionary statements contained or referred to in this announcement. Readers should not place undue reliance on forward-looking statements. Additional risk factors that may affect future results are contained in Royal Dutch Shell’s 20-F for the year ended December 31, 2016 (available at www.shell.com/investor and www.sec.gov). These risk factors also expressly qualify all forward looking statements contained in this announcement and should be considered by the reader. Each forward-looking statement speaks only as of the date of this announcement, June 6, 2017. Neither Royal Dutch Shell plc nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this announcement.
We may have used certain terms, such as resources, in this announcement that United States Securities and Exchange Commission (SEC) strictly prohibits us from including in our filings with the SEC. U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website www.sec.gov.