Quest Carbon Capture and Storage (CCS) 2015

Trade Release: DNV GL Approves Shell Carbon Capture Technology to Bring Down Emissions from Fortum Waste-to-Energy Plant

DNV GL has approved as qualified technology for a full-scale demonstration project to remove carbon emissions at a waste-to-energy plant in Oslo, Norway.

By Shell Catalysts & Technologies on Jul 12, 2020

OSLO – 1 July 2020: DNV GL has approved as qualified technology for a full-scale demonstration project to remove carbon emissions at a waste-to-energy plant in Oslo, Norway.

Gassnova, the Norwegian state agency for carbon capture and storage projects (CCS), is supporting the project, which tested Shell’s CANSOLV CO2 carbon capture technology at Fortum Oslo Varme’s Waste-to-Energy plant at Klemetsrud in Oslo. This project will contribute towards Norway’s target to reduce emissions with at least 50%, and towards 55% by 2030 compared to 1990 levels.

The Fortum Oslo Varme plant incinerates domestic and international sorted household and industrial waste. The excess heat is used to produce district heating and electricity.

DNV GL worked with Shell and Fortum Oslo Varme to verify the application of its recommended practices: DNVGL-RP-A203 Technology Qualification and DNVGL-RP-J201 Qualification procedures, for carbon dioxide capture technology. The recommended practices provide a systematic approach to technology qualification in a manner that ensures traceability throughout the process.

Learn More About Carbon Dioxide Purification Catalysts

Achieving Net Negative Emissions

Steam and CO2 are emitted at Klemetsrud, where dust, dioxins, NOx, HCl, SO2, and heavy metals are cleaned from the flue gas. The capture of more than 90% of all CO2 in the flue gas was achieved during a pilot initiated in 2018.

Going full scale with CCS, and with 50% of waste incinerated at the plant being of biological origin, the environmental performance of the plant will be significantly improved by achieving net negative emissions.

Around 400,000 tonnes of CO₂ can be captured at the site every year, the equivalent of removing 200,000 cars from regular use.

The plan is that captured CO2 from the plant will be injected into geological formations thousands of metres below sea level West of Norway.

“The third-party technology qualification by DNV GL gave us confidence that the project risk related to implementing the Shell technology was low. The pilot plant demonstrated the ability to capture more than 90% of the CO2 from the flue gas at our waste-to-energy plant in Oslo,” said Jannicke Gerner Bjerkas, CCS-director in Fortum Oslo Varme.

“When we establish a full-scale CO2-capture plant we can significantly reduce the city’s CO2 emissions. We aim to export the use of CCS to Europe’s waste-to-energy plants contributing to reaching the goals of the Paris Agreement,” Bjerkas said.

Per Langer, Executive Vice President, City Solutions, Fortum added, “We believe cities are leading forces for climate change and the Fortum Oslo Varme plant being connected to the city and its infrastructure is very well suited to act on climate change and create a cleaner world.”

Collaborating to Tackle the Global Waste Crisis

DNV GL has also undertaken technology qualification at a second pilot site supported by Gassnova. In April, the risk management and quality assurance company approved CCS technology developed by Aker Solutions and tested at Norcem’s cement plant in Brevik, Norway.

Arve Johan Kalleklev, Regional Manager, Norway and Eurasia, DNV GL – Oil & Gas said, “Carbon capture and storage is currently the only technology capable of achieving the significant reductions in CO2 emissions needed to lessen the environmental impact of industrial processes around the world.

“In September 2018, the World Bank announced that waste production is predicted to rise by 70% to 2050. More than two billion tonnes of waste per year are currently generated by the global population.

“Fortum Oslo Varme’s CCS project is expected to help lead the way in tackling the global waste crisis, proving that large-scale waste incineration and combined heat and power plants can not only reduce the use of landfills but also significantly reduce or offset CO2 emissions associated with industrial carbon output.”

Paul Rek, Vice President of Shell Catalysts & Technologies said, “Shell is pleased to be able to collaborate with Fortum to bring carbon capture technology to the City of Oslo. We are proud that our 70+ years of developing technologies such as Cansolv CO2, to treat various processes and natural gas streams, has provided added assurance of a successful outcome to Fortum’s CCS project.”

Explore Additional Emission Reduction Technologies from Shell Catalysts & Technologies

Notes to editors

Download images HERE

For media enquiries, please contact:

Neil Slater
Head of External Relations
DNV GL - Oil & Gas
Tel: +44 (0) 7876 578 353


Alan Gorham

Account Director
BIG Partnership
Tel: +44 (0) 1 224253810

About DNV GL

DNV GL is a global quality assurance and risk management company. Driven by our purpose of safeguarding life, property, and the environment, we enable our customers to advance the safety and sustainability of their business. Operating in more than 100 countries, our professionals are dedicated to helping customers in the maritime, oil and gas, power, and renewables and other industries to make the world safer, smarter, and greener.

As the technical advisor to the oil and gas industry, we bring a broader view to complex business and technology risks in global and local markets. Providing a neutral ground for industry cooperation, we create and share knowledge with our customers, setting standards for technology development and implementation. From project initiation to decommissioning, our independent experts enable companies to make the right choices.