All Cassida® Products are  NSF H1, USDA , CFIA , Halal, and Kosher approved. Shell Cassida® products also contain no GMO’s (genetically modified organisms) and are suitable in preparation of vegetarian food. Please refer to the following chart to discover the right Shell Cassida® product for your application, or download the Shell Cassida pdf (PDF: 44 KB - opens in a new window). To view Information about the food industry products shown below, please go to our Lubricants Information page. Information about product shelf life and a table containing manufactured dates of specific products can be found below. Many Cassida® products are Original Equipment Manufacturer Approved | Applications | Products | Benefits |
|---|
| Hydraulic Oils | Shell Cassida Fluid HF 32
Shell Cassida Fluid HF 46
Shell Cassida Fluid HF 68 | Long oil life, excellent filterability giving a cleaner system and longer equipment life | | Gearboxes | Shell Cassida Fluid GL 220
Shell Cassida Fluid GL 460 | Excellent load carrying properties for a wide range of applications | | Air Compressors | Shell Cassida Fluid CR 46 | Longer oil change intervals with less wear; does not add odour to compressed air | | Can Seamers | Shell Cassida Fluid GLE 150 | Keeps machine clean and protects against wear and corrosion | | Vacuum Pump Oil | Shell Cassida Fluid VP 100 | Provides superior lubrication under the majority of operating conditions. Very good anti-wear and high temperature performance, water shedding properties, and resistance to foaming. | | Multi-purpose Fluid | Shell Cassida Silicone Fluid | Excellent adhesive properties minimise 'fling off' in use and 'wash-off' by cold and hot water. General maintenance lubricant for slow rotating machinery, slow speed bearings and conveyors. | | Chain Oils | Shell Cassida Chain 1000
Shell Cassida Chain 150 | Outstanding adhesion to metal surfaces and excellent water resistance | | Penetrating Oil | Shell Cassida Fluid PL | Facilitates the disassembling of seized surfaces, prevents further corrosion and seizing | | General Purpose Greases | Shell Cassida Grease RLS 00
Shell Cassida Grease RLS 2 | A multi-pupose grease for lightly loaded bearings and some gear applications with good adhesive properties and water resistance. Often used in central grease systems. | | High Load Operation Greases | Shell Cassida Grease EPS 00
Shell Cassida Grease EPS 2 | Extreme pressure properties for use in gear boxes transmitting high loads. High mechanical stability and good protection against corrosion. Often used in central grease systems | | High Temperature Grease | Shell Cassida Grease HTS 2 | Synthetic oil-based grease with an exceptionally high viscosity base oil, capable of lubricating bearings and gear systems operating at temperatures up to 220C. | | Low Temperature Grease | Shell Cassida LTS 1 | For bearings and some gears in machines operating in refrigerated conditions, this grease works at temperatures as low as -45C. | | Heavy Duty Grease | Shell Cassida Grease HDS 2 | Excellent high temperature oxidative stability giving long life and good protection against corrosion. Outstanding adhesion to metal surfaces and excellent water resistance |
Shelf Life - All Cassida grades may be stored by Shell (or our agents), closed, with original seal intact, under proper conditions (covered store room, out of direct sunlight, away from direct heat sources, between 0 and 40 °C) , for a max. of 5 years (Cassida Fluids) or 2 years (Cassida Greases) from date of manufacture.
- After sale, we advise customers that Cassida should be used (i.e. transferred from pack to machine) within 2 years of purchase. It is therefore recommended that customers mark each Cassida container with the date it was received.
In summary, the expiry dates for Cassida® products in sealed containers are: Cassida® Fluids
5 years from date of manufacture Cassida® Greases
2 years from date of manufacture All Cassida® products in open containers should be used within 2 years.
|
