Main content | back to top
Cleaning with AeroShell® Flight Jacket™ Products
AeroShell Flight Jacket Polish can be applied in two ways–with a hand-held orbiting polisher or with the AeroShell Flight Jacket Anti-Static Hand Pad. Clean the aircraft as outlined in the prior section before applying AeroShell Flight Jacket Polish.
Using orbiting polisher:
- Make sure all sensors, transmitters, static ports and other sensitive areas of the aircraft are covered or protected.
- Divide area into reachable sections. Apply small amounts of AeroShell Flight Jacket Polish to the polisher pad.
- Work product into surface. Bring to haze and buff until haze is gone.
- Make sure proper pressure is applied and do not leave orbiting polisher stationary on one area or paint could be damaged by the orbiting polisher.
- Using AeroShell® Flight Jacket™ Microfiber Cloth or AeroShell Flight Jacket Anti-Static Hand Pad, remove excess residue from surface.
- Repeat these steps on all areas of aircraft.
Applying AeroShell Flight Jacket Polish by hand:
- Make sure all sensors, transmitters, static ports and other sensitive areas of the aircraft are covered or protected.
- Divide area into reachable sections. Apply a small amount of AeroShell Flight Jacket Polish to slightly dampened, clean AeroShell Flight Jacket Microfiber Cloth or AeroShell Flight Jacket Anti-Static Hand Pad.
- Using circular motion, work product into surface. Let dry to haze.
- Using a clean AeroShell Flight Jacket Microfiber Cloth, remove hazed residue from surface.
- Repeat these steps on all areas of aircraft.
